How to Improve Wi-Fi Signal at Home (10 Practical Tips)

A router that works perfectly in one room and drops out completely in another is one of the most common home technology frustrations. The cause is almost never a broken router. It’s usually where the router is sitting, what’s between it and your devices, or a setting that was never changed from the factory default.

This guide covers ten practical improvements, starting with the ones that make the biggest difference.

Quick Answer

To improve Wi-Fi signal at home, move the router to a central, elevated, open position away from walls and interference sources, switch to the 5 GHz band for nearby devices, change the Wi-Fi channel to avoid congestion, restart the router monthly, and update its firmware.

Tip 1: Move Your Router to a Better Location

This is the single most impactful change you can make, and it costs nothing.

Wi-Fi signals spread in all directions from the router. If the router is in a corner, most of that signal goes into walls and outside. If it’s on the floor, most of it goes sideways into the ground.

Move it to:

  • The centre of your home, or as close as possible.
  • A high shelf or table rather than the floor.
  • A clear, open area rather than inside a cabinet.

Keep it away from:

  • Thick concrete or brick walls.
  • Other electronic equipment, particularly cordless phones and baby monitors.
  • Microwave ovens, which operate on the same frequency as Wi-Fi.
  • Aquariums and large metal objects.

Tip 2: Restart Your Router Regularly

Over time, routers accumulate memory usage and develop small faults that reduce performance.

  1. Unplug the power cable from the router.
  2. Wait 30 seconds.
  3. Plug it back in.
  4. Wait 2–3 minutes for it to reconnect fully.

Restart once a month, or set a reminder. Some routers have a scheduled restart option in their settings, which is even easier.

Tip 3: Switch to the Right Frequency Band

Modern routers broadcast on two bands, and picking the right one makes a real difference.

5 GHz: faster speeds, shorter range, less interference. Best for devices close to the router, like a laptop or iPhone in the same room.

2.4 GHz: slower speeds, longer range, better at penetrating walls. Best for devices further away or in different rooms.

On your iPhone, you usually connect to the band the router selects automatically. To check:

  1. Go to Settings → Wi-Fi.
  2. Tap the (i) next to your network.
  3. Check the Frequency shown.

If your router broadcasts separate networks for each band (e.g. “HomeWiFi” and “HomeWiFi_5G”), connect to the 5 GHz version when you’re near the router.

Wi-Fi frequency band settings on iPhone
Wi-Fi frequency band settings on iPhone

Tip 4: Change Your Wi-Fi Channel

Every router nearby is broadcasting on a channel, and if many routers use the same channel in your building or street, they interfere with each other.

  1. Open your router’s admin page (usually 192.168.1.1 in your browser; the address is printed on the router label). For the login, see our guide on how to find your Wi-Fi password.
  2. Go to the Wireless settings.
  3. Try channels 1, 6, or 11 for 2.4 GHz, since these don’t overlap.
  4. For 5 GHz, choose a channel not used by nearby networks.
  5. Save and let the router restart.

Tip 5: Update Your Router’s Firmware

Router firmware updates improve performance, fix bugs, and patch security issues.

  1. Log in to your router’s admin page.
  2. Look for a Firmware Update or Software Update section.
  3. Check for updates and install if available.

Some routers update automatically; others need a manual check every few months.

Tip 6: Reduce Interference from Other Devices

Several devices in a typical home compete with Wi-Fi signals.

  • Old cordless phones on 2.4 GHz interfere directly. Replace them with DECT phones.
  • Microwave ovens cause brief interference when in use. Moving the router further from the kitchen helps.
  • Bluetooth devices share the 2.4 GHz space. They usually coexist fine, but if you have many Bluetooth devices, switching to 5 GHz Wi-Fi helps.

Tip 7: Check How Your Devices Connect

Sometimes the signal is fine and the problem is the device.

  1. On your iPhone, go to Settings → Wi-Fi and check the bars next to your network name.
  2. On your Mac, hold Option and click the Wi-Fi symbol in the menu bar to see detailed signal information, including the RSSI value. The closer to zero, the stronger the signal, for example -40 dBm is strong and -80 dBm is weak.

If one specific device has poor signal while others are fine, the issue is with that device’s Wi-Fi antenna, not the router.

Mac Wi-Fi symbol in the menu bar
Mac Wi-Fi symbol in the menu bar

Tip 8: Use a Wired Connection for Heavy Use

Wi-Fi is convenient, but an Ethernet cable is faster, more stable, and has no interference.

Connect your Mac directly to the router with an Ethernet cable for video calls, large file transfers, and online gaming. For a MacBook without an Ethernet port, a USB-C to Ethernet adapter costs very little.

Tip 9: Add a Wi-Fi Extender or Mesh System

If parts of your home have poor coverage no matter where the router goes, extending the network is the solution.

Wi-Fi extender (repeater): a cheaper device that rebroadcasts your existing signal. Good for a single dead zone but creates a separate network name that your devices may not switch to automatically.

Mesh Wi-Fi system: a set of two or three units that work together as one network. More expensive, but far better for large homes or houses with thick walls. Your devices switch between units seamlessly.

Place an extender or second mesh unit halfway between the router and the weak spot, in a location with good signal from the router.

Tip 10: Check Your Internet Plan Speed

Sometimes the Wi-Fi is working perfectly, but the internet connection from your provider is simply slow.

  1. Connect your Mac directly to the router with a cable.
  2. Run a speed test at fast.com or speedtest.net.
  3. Compare the result to the speed your provider promised.

If the wired speed matches what you’re paying for, the problem is your Wi-Fi setup. If even the wired speed is far below your plan, contact your provider.

Frequently Asked Questions

Does more devices on Wi-Fi slow it down?
Yes. Each device uses a share of the available bandwidth. Disconnecting devices you’re not using helps, and a router with Wi-Fi 6 handles many devices more efficiently.

How far can Wi-Fi reach?
Typically 30–50 metres in open space. Inside a home with walls, this drops significantly. Concrete and brick reduce range far more than plasterboard.

Should I keep my Wi-Fi password-protected?
Always. An open network lets anyone use your connection and see your traffic. Use WPA2 or WPA3 encryption.

Can too many neighbours’ networks slow my Wi-Fi?
Yes, especially on 2.4 GHz in a dense building. Changing channels as described in Tip 4 helps.

Does the router brand matter?
More than the brand, the age matters. A router more than five years old may lack the hardware to deliver modern speeds, and replacement is the most effective upgrade.

Conclusion

Start with router placement and a restart, those two free changes solve more problems than anything else. Then check the channel, update the firmware, and switch to 5 GHz for close devices. If coverage still fails in certain rooms, a mesh system is a worthwhile investment.

If you still have connection problems after improving the signal, our guide on what to do when your iPhone connected to Wi-Fi but no internet covers the most common causes of a signal that looks fine but doesn’t work.

Leave a Comment